重庆分公司
重庆分公司，新征程启航
为企业提供网站建设、域名注册、服务器等服务
如何编写BashShell通过gnuplot绘制系统性能数据图-创新互联
这篇文章主要讲解了“如何编写Bash Shell通过gnuplot绘制系统性能数据图”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“如何编写Bash Shell通过gnuplot绘制系统性能数据图”吧！
使用步骤：
1.设置一个定时任何 执行getperf.sh，采集性能数据
2.将采集到性能数据文件，如：192.168.1.1.tar.gz 解压
3.将性能分析的脚步performance_analyse.sh 放到解压后的目录中
4.安装gnuplot程序（这里下载）
5.将字体文件夹，拷贝到/usr/share/fonts/目录
6.直接运行 bash performance_analyse.sh
getperf.sh脚本内容如下：
#################################################
#说明：
# 定义时间TIMES参数，表示采集的次数，
# 采集时间 = TIMES * INTERVAL
#eg:
# TIMES=180 , INTERVAL=10 采集时间就是半小时
#
#################################################
#!/bin/bash
TIMES=3600
INTERVAL=2
PWD=`pwd`
TIME=`date "+%F %H:%M:%S"`
TAR=`whereis tar|awk -F ":" '{print $2}'|awk '{print $1}'`
SAR=`whereis sar|awk -F ":" '{print $2}'|awk '{print $1}'`
IOSTAT=`whereis iostat|awk -F ":" '{print $2}'|awk '{print $1}'`
# Check Moniter Tool
SysInfo(){
echo "sysip : $SYSIP"|tee $PWD/$SYSIP/sysinfo
echo "starttime : $TIME" |tee -a $PWD/$SYSIP/sysinfo
/sbin/ifconfig >>$PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
/usr/sbin/dmidecode >>$PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
/bin/cat /proc/cpuinfo >> $PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
/sbin/fdisk -l >> $PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
/bin/df -Th >>$PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
/usr/bin/free -m >> $PWD/$SYSIP/sysinfo
echo "===================================" >>$PWD/$SYSIP/sysinfo
echo ""
}
CheckEnv(){
PUB_IP=`/sbin/ifconfig |grep "inet addr" | awk -F: '{print $2}'| awk '{print $1}'|grep -v "172\.\|10\.\|127\.\|192\."|sed -n 1p`
PRI_IP=`/sbin/ifconfig |grep "inet addr" | awk -F: '{print $2}'| awk '{print $1}'|grep "10\.\|127\.\|192\."|sed -n 1p`
if [ "snda$PUB_IP" == "snda" ];then
SYSIP=$PRI_IP
else
SYSIP=$PUB_IP
fi
if [ -d $PWD/$SYSIP ];then
rm -rf $PWD/$SYSIP
fi
mkdir -p $PWD/$SYSIP
if ! grep iostat /usr/bin/iostat ;then
yum -y install sysstat
fi
}
GetPerf(){
CPUUSAGE="$PWD/$SYSIP/cpuusage.log"
MEMUSAGE="$PWD/$SYSIP/memusage.log"
DISKUSAGE="$PWD/$SYSIP/diskusage.log"
NETWORK="$PWD/$SYSIP/network.log"
$SAR -P ALL $INTERVAL $TIMES>> $CPUUSAGE &
$IOSTAT -dkx $INTERVAL $TIMES>> $DISKUSAGE &
$SAR -n DEV $INTERVAL $TIMES>> $NETWORK &
$SAR -r $INTERVAL $TIMES>> $MEMUSAGE &
for ((i=0;i<$TIMES;i++))
do
sleep $INTERVAL
done
}
CheckEnv
SysInfo
GetPerf
#在同一台机器上第二次采集数据时，会删除之前采集的数据，重新采集
#采集完成之后，会生产一个以 IP.tar.gz的压缩包。将这个压缩包，放到
#分析脚本performance_analyse.sh 的同级目录。
if [ -d $PWD/$SYSIP ];then
cd $PWD
rm -f $SYSIP.tar.gz
tar zcvf $SYSIP.tar.gz $SYSIP
fiperformance_analyse.sh脚本内容如下：
#################################################
#
# 这个脚本的作用是处理由性能采集脚本收集到的性能数据
#然后使用gunplot生产直观的性能图。
#
#################################################
#!/bin/bash
SysInfo(){
local file=$1
local productname="unknow"
local cpumodel="unknow"
local cpucore="unknow"
local cpumhz="unknow"
local physical="unknow"
local realcpucore="unknow"
local diskpart="unknow"
local memory="unknow"
ipaddr=`cat $file |grep -i "net addr"|grep -v "127"`
productname=`cat $file |grep -i "product name"`
cpumodel=`cat $file |grep -i "model name"|uniq -d`
cpucore=`cat $file |grep "processor"|wc -l`
cpumhz=`cat $file |grep -i "cpu MHz"|uniq -d`
physical=`cat $file |grep -i "physical id"|sort -n|uniq -d|wc -l`
realcpucore=`cat $file |grep -i "cpu cores"|uniq -d|awk -F ":" '{print $2}'`
memory=` cat $file |grep -i -EB1 "mem:"`
diskpart=`cat $file |grep -i "disk"|grep -E "[shv][d][a-z]"`
echo "System Information:"|tee -a $REPORTFILE
echo "IP address:"|tee -a $REPORTFILE
echo -e "$ipaddr"|tee -a $REPORTFILE
echo "$productname" |tee -a $REPORTFILE
echo -e "\t$cpumodel" |tee -a $REPORTFILE
echo -e "\tCPU cores\t:$cpucore"|tee -a $REPORTFILE
echo -e "\t$cpumhz"|tee -a $REPORTFILE
echo -e "\tPhysical cpu number:$physical"|tee -a $REPORTFILE
echo -e "\tEach CPU real core:$realcpucore"|tee -a $REPORTFILE
echo "$diskpart"|tee -a $REPORTFILE
echo -e "Memory(MB):\n$memory"|tee -a $REPORTFILE
}
CpuAllUsage(){
local file=$1
cat $file|grep -i "all"|grep -v -i -E "average|linux|system" >$GNUPLOTFOLDER/sar_cpu.$$
TITLE=`cat $file |sed "/^$/d"|grep -v -i "average|linux"|sed 1d|sed -n 1p`
local SOURCE_SAR_CPU="$GNUPLOTFOLDER/sar_cpu.$$"
local USER_UASGE=`echo $TITLE |awk '{print $3}'`
local NICE_UASGE=`echo $TITLE |awk '{print $4}'`
local SYSTEM_UASGE=`echo $TITLE |awk '{print $5}'`
local IOWAIT_UASGE=`echo $TITLE |awk '{print $6}'`
local STEAL_UASGE=`echo $TITLE |awk '{print $7}'`
local IDLE_UASGE=`echo $TITLE |awk '{print $8}'`
local cpuusagemax=`cat $SOURCE_SAR_CPU|awk '{print $3+$4+$5+$6+$7}'|sort -r|sed -n 1p`
local Tmp_ylable=`echo $cpuusagemax|awk -F "." '{print $1}'`
local ylable=`echo $Tmp_ylable+5|bc`
local cpuusagemin=`cat $SOURCE_SAR_CPU|awk '{print $3+$4+$5+$6+$7}'|sort|sed -n 1p`
local cpuusageavg=`awk 'BEGIN{total=0}{total+=$8}END{print 100-total/NR}' $SOURCE_SAR_CPU`
echo "`date '+%F %H:%M:%S'`: CPU Performance analysis" |tee -a $REPORTFILE
echo -e "\t1.System Cpu load(%) \tmax=$cpuusagemax,average=$cpuusageavg,mim=$cpuusagemin" |tee -a $REPORTFILE
/usr/local/bin/gnuplot --persist <$GNUPLOTFOLDER/idle_sum.$$
for (( i=0;i<=$corenu;i++ ))
do
cat $file |grep -v -i -E "average|system|all|linux"|sed "/^$/d"|awk "(\$2==$i){print}"|awk '{print $1 ," ",100-$8}'>$GNUPLOTFOLDER/$i.txt
local idlesum=`awk 'BEGIN{total=0}{total+=$2}END{print total}' $GNUPLOTFOLDER/$i.txt`
echo $i $idlesum >>$GNUPLOTFOLDER/idle_sum.$$
done
first_load=`cat $GNUPLOTFOLDER/idle_sum.$$|sort -n -k 2 -r|sed -n 1p|awk '{print $1}'`
second_load=`cat $GNUPLOTFOLDER/idle_sum.$$|sort -n -k 2 -r|sed -n 2p|awk '{print $1}'`
third_load=`cat $GNUPLOTFOLDER/idle_sum.$$|sort -n -k 2 -r|sed -n 3p|awk '{print $1}'`
load=($first_load $second_load $third_load)
echo -e "\t2.Each core load:"
local cpuload=("First" "Second" "Third")
local nu=0
for i in ${load[@]}
do
local coreloadmax=`cat $GNUPLOTFOLDER/$i.txt|sort -n -k 2 -r|sed -n 1p|awk '{print $2}'`
local coreloadavg=`awk 'BEGIN{total=0}{total+=$2}END{print total/NR}' $GNUPLOTFOLDER/$i.txt`
local coreloadmin=`cat $GNUPLOTFOLDER/$i.txt|sort -n -k 2|sed -n 1p|awk '{print $2}'`
echo -e "\t\t\t Load ${cpuload[$nu]} core $i : max=$coreloadmax , avg=$coreloadavg , min=$coreloadmin"|tee -a $REPORTFILE
nu=`echo $nu+1|bc`
done
for ((i=0;i<=corenu;i++))
do
if [ $i -eq $first_load ];then
LW=4
elif [ $i -eq $second_load ];then
LW=3
elif [ $i -eq $third_load ];then
LW=2
else
LW=1
fi
TMP1="$GNUPLOTFOLDER/$i.txt"
TMP2="using 1:2 with l lw $LW"
TMP3="core $i "
PLOT="$PLOT \"$TMP1\" $TMP2 title \"$TMP3\","
done
local tmp_ylabel_range=`cat $file|grep -v -i -E "average|system|all|linux"|sed "/^$/d"|awk '{print 100-$8}'|sort -n -r|sed -n 1p|awk -F "." '{print $1}'|sed -n 1p`
local ylabel_range=`echo $tmp_ylabel_range+5|bc`
/usr/local/bin/gnuplot --persist <$GNUPLOTFOLDER/memory.$$
SOURCE_FILE=$GNUPLOTFOLDER/memory.$$
local memtotal=`awk 'BEGIN{total=0}{total+=$3}END{print total/NR}' $SOURCE_FILE`
local memusedmax=`awk '{print $4}' $SOURCE_FILE|sort -n -r|sed -n 1p`
local memusedavg=`awk 'BEGIN{total=0}{total+=$4}END{print total/NR}' $SOURCE_FILE`
local memusedmin=`awk '{print $4}' $SOURCE_FILE|sort -n|sed -n 1p`
local memfreemax=`awk '{print $2}' $SOURCE_FILE|sort -n -r|sed -n 1p`
local memfreeavg=`awk 'BEGIN{total=0}{total+=$2}END{print total/NR}' $SOURCE_FILE`
local memfreemin=`awk '{print $2}' $SOURCE_FILE|sort -n|sed -n 1p`
local memcachemax=`awk '{print $7}' $SOURCE_FILE|sort -n -r|sed -n 1p`
local memcacheavg=`awk 'BEGIN{total=0}{total+=$7}END{print total/NR}' $SOURCE_FILE`
local memcachemin=`awk '{print $7}' $SOURCE_FILE|sort -n|sed -n 1p`
local memused_cachemax=`awk '{print $4-$7}' $SOURCE_FILE|sort -n -r|sed -n 1p`
local memused_cacheavg=`awk 'BEGIN{total=0}{total+=($4-$7)}END{print total/NR}' $SOURCE_FILE`
local memused_cachemin=`awk '{print $4-$7}' $SOURCE_FILE|sort -n|sed -n 1p`
local used_percent=`awk 'BEGIN{total=0}{total+=$5}END{print total/NR}' $SOURCE_FILE`
echo "`date '+%F %H:%M:%S'`: Memory usage analysis" |tee -a $REPORTFILE
echo -e "\t\t1.total memory: $memtotal MB"|tee -a $REPORTFILE
echo -e "\t\t2.memory used: max=$memusedmax MB ,avg=$memusedavg MB ,min=$memusedmin MB"|tee -a $REPORTFILE
echo -e "\t\t3.memory free: max=$memfreemax MB ,avg=$memfreeavg MB ,min=$memfreemin MB"|tee -a $REPORTFILE
echo -e "\t\t4.memory cache: max=$memcachemax MB ,avg=$memcacheavg MB ,min=$memcachemin MB"|tee -a $REPORTFILE
echo -e "\t\t4.memory used-cache: max=$memused_cachemax MB ,avg=$memused_cacheavg MB ,min=$memused_cachemin MB"|tee -a $REPORTFILE
/usr/local/bin/gnuplot --persist <$GNUPLOTFOLDER/disk.$$
local SOURCE_FILE=$GNUPLOTFOLDER/disk.$$
plot_readiops=""
plot_writeiops=""
local nu=1
echo "`date '+%F %H:%M:%S'`: Disk Performance analysis" |tee -a $REPORTFILE
for diskpart in `cat $file |sed '1,2d'|grep -v -i "device"|awk -F " " '{print $1}'|sort|uniq -d|sed '/^$/d'|grep -E "^[a-z][a-z][a-z]$"`
do
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE >$GNUPLOTFOLDER/gnu_tmpfile.$diskpart
plot_readiops="$plot_readiops \"$GNUPLOTFOLDER/gnu_tmpfile.$diskpart\" using 4 w l title \"$diskpart read IOPS\","
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk 'BEGIN{total=0}{total+=$4}END{print total/NR}'>$GNUPLOTFOLDER/t.$$
local read_avg_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $4}'|sort -n|sed -n 1p>$GNUPLOTFOLDER/t.$$
local read_min_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $4}'|sort -n -r |sed -n 1p>$GNUPLOTFOLDER/t.$$
local read_max_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
plot_writeiops="$plot_writeiops \"$GNUPLOTFOLDER/gnu_tmpfile.$diskpart\" using 5 w l title \"$diskpart write IOPS\","
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk 'BEGIN{total=0}{total+=$5}END{print total/NR}'>$GNUPLOTFOLDER/t.$$
local write_avg_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $5}'|sort -n|sed -n 1p>$GNUPLOTFOLDER/t.$$
local write_min_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $5}'|sort -n -r |sed -n 1p>$GNUPLOTFOLDER/t.$$
local write_max_iops=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk 'BEGIN{total=0}{total+=$6}END{print total/NR}'>$GNUPLOTFOLDER/t.$$
local avg_read_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $6}'|sort -n|sed -n 1p>$GNUPLOTFOLDER/t.$$
local min_read_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $6}'|sort -n -r |sed -n 1p>$GNUPLOTFOLDER/t.$$
local max_read_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk 'BEGIN{total=0}{total+=$7}END{print total/NR}'>$GNUPLOTFOLDER/t.$$
local avg_write_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $7}'|sort -n|sed -n 1p>$GNUPLOTFOLDER/t.$$
local min_write_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $7}'|sort -n -r |sed -n 1p>$GNUPLOTFOLDER/t.$$
local max_write_throughput=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk 'BEGIN{total=0}{total+=$10}END{print total/NR}'>$GNUPLOTFOLDER/t.$$
local avg_await=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $10}'|sort -n|sed -n 1p>$GNUPLOTFOLDER/t.$$
local min_await=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
awk "(\$1==\"$diskpart\"){print}" $SOURCE_FILE|awk '{print $10}'|sort -n -r |sed -n 1p>$GNUPLOTFOLDER/t.$$
local max_await=`cat $GNUPLOTFOLDER/t.$$`
rm -f $GNUPLOTFOLDER/t.$$
echo -e "\t\t$nu.$diskpart performance:"|tee -a $REPORTFILE
echo -e "\t\t\t read iops:\t\t max=$read_max_iops ,\t avg=$read_avg_iops ,\t min=$read_min_iops"|tee -a $REPORTFILE
echo -e "\t\t\t write iops:\t\t max=$write_max_iops ,\t avg=$write_avg_iops ,\t min=$write_min_iops"|tee -a $REPORTFILE
echo -e "\t\t\t read data per second:\t max=$max_read_throughput KB,\t avg=$avg_read_throughput KB,\t min=$min_read_throughput KB"|tee -a $REPORTFILE
echo -e "\t\t\t write data per second:\t max=$max_write_throughput KB,\t avg=$avg_write_throughput KB,\t min=$min_write_throughput KB"|tee -a $REPORTFILE
echo -e "\t\t\t each io wait time:\t max=$max_await ms ,\t avg=$avg_await ms ,\t min=$min_await ms"|tee -a $REPORTFILE
done
/usr/local/bin/gnuplot --persist <$GNUPLOTFOLDER/network_sourcefile.txt
local sourcefile=$GNUPLOTFOLDER/network_sourcefile.txt
local titlerxpackage=`cat $file |grep -i "IFACE"|awk '{print $3}'|uniq -d`
local titletxpackage=`cat $file |grep -i "IFACE"|awk '{print $4}'|uniq -d`
local titlerxbyte=`cat $file |grep -i "IFACE"|awk '{print $5}'|uniq -d`
local titletxbyte=`cat $file |grep -i "IFACE"|awk '{print $6}'|uniq -d`
if [ $titlerxbyte == 'rxkB/s' ];then
unit="KB"
elif [ $titlerxbyte == 'rxbyt/s' ];then
unit="byte"
fi
local rxpackage=''
local txpackage=''
local rxbyte=''
local txbyte=''
local nu=1
echo "`date '+%F %H:%M:%S'`: Network Performance analysis" |tee -a $REPORTFILE
for netcard in `cat $file |grep -E "eth|em"|grep -v -i "average"|awk '{print $2}'|sort|uniq -d`
do
cat $sourcefile|grep $netcard>$GNUPLOTFOLDER/gnu_network.$netcard
rxpackage="$rxpackage \"$GNUPLOTFOLDER/gnu_network.$netcard\" using 1:3 w l title \"$netcard $titlerxpackage\","
txpackage="$txpackage \"$GNUPLOTFOLDER/gnu_network.$netcard\" using 1:4 w l title \"$netcard $titletxpackage\","
rxbyte="$rxbyte \"$GNUPLOTFOLDER/gnu_network.$netcard\" using 1:5 w l title \"$netcard $titlerxbyte\","
txbyte="$txbyte \"$GNUPLOTFOLDER/gnu_network.$netcard\" using 1:6 w l title \"$netcard $titletxbyte\","
max_rxpck=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -r -k 3|sed -n 1p|awk '{print $4}'`
avg_rxpck=`awk 'BEGIN{total=0}{total+=$3}END{print total/NR}' $GNUPLOTFOLDER/gnu_network.$netcard`
min_rxpck=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -k 3|sed -n 1p|awk '{print $4}'`
max_txpck=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -r -k 4|sed -n 1p|awk '{print $5}'`
avg_txpck=`awk 'BEGIN{total=0}{total+=$4}END{print total/NR}' $GNUPLOTFOLDER/gnu_network.$netcard`
min_txpck=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -k 4|sed -n 1p|awk '{print $5}'`
max_rxbyt=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -r -k 5|sed -n 1p|awk '{print $6}'`
avg_rxbyt=`awk 'BEGIN{total=0}{total+=$5}END{print total/NR}' $GNUPLOTFOLDER/gnu_network.$netcard`
min_rxbyt=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -k 5|sed -n 1p|awk '{print $6}'`
max_txbyt=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -r -k 6|sed -n 1p|awk '{print $7}'`
avg_txbyt=`awk 'BEGIN{total=0}{total+=$6}END{print total/NR}' $GNUPLOTFOLDER/gnu_network.$netcard`
min_txbyt=` cat $GNUPLOTFOLDER/gnu_network.$netcard|sort -n -k 6|sed -n 1p|awk '{print $7}'`
echo -e "\t\t$nu.$netcard load:"|tee -a $REPORTFILE
echo -e "\t\t\t rxpck/s:\t\t max=$max_rxpck ,\t avg=$avg_rxpck ,\t min=$min_rxpck"|tee -a $REPORTFILE
echo -e "\t\t\t txpck/s:\t\t max=$max_txpck ,\t avg=$avg_txpck ,\t min=$min_txpck"|tee -a $REPORTFILE
echo -e "\t\t\t rxbyt/s:\t max=$max_rxbyt $unit,\t avg=$avg_rxbyt $unit,\t min=$min_rxbyt $unit"|tee -a $REPORTFILE
echo -e "\t\t\t txbyt/s:\t max=$max_txbyt $unit,\t avg=$avg_txbyt $unit,\t min=$min_txbyt $unit"|tee -a $REPORTFILE
nu=`echo $nu+1|bc`
done
/usr/local/bin/gnuplot --persist < $REPORTFILE
SysInfo $SYSINFO_FILE
echo "" >> $REPORTFILE
CpuAllUsage $CPU_USAGE_FILE
CpuEachCoreUsage $CPU_USAGE_FILE
echo "" >> $REPORTFILE
MemoryUsage $MEMORY_USAGE_FILE
echo "" >> $REPORTFILE
DiskUsage $DISK_USAGE_FILE
echo "" >> $REPORTFILE
NetworkPerformance $NETWORK_USAGE_FILE
echo "" >> $REPORTFILE
#脚本执行完成之后，会在性能数据所在的目录中生成
#report.txt 性能报告文本
#TotalCpuUsage.png CPU利用率图表
#CpuCoreIdle.png 每个CPU核心的Idle
#MemoryUsage.png 内存使用率
#DiskIOPSPerformance.png 磁盘IOPS性能
#NetworkPackagePerformance.png 网卡发包率性能
#NetworkThougtputPerformance.png 网卡吞吐性能
################################################# 感谢各位的阅读，以上就是“如何编写Bash Shell通过gnuplot绘制系统性能数据图”的内容了，经过本文的学习后，相信大家对如何编写Bash Shell通过gnuplot绘制系统性能数据图这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是创新互联网站建设公司，，小编将为大家推送更多相关知识点的文章，欢迎关注！
网页题目：如何编写BashShell通过gnuplot绘制系统性能数据图-创新互联
网址分享：http://cqcxhl.cn/article/cojchh.html