【linux】vstp搭建

1.上传VSTP文件到/opt
2.上传vsftpd 到/etc/pam.d

#%PAM-1.0
auth sufficient /lib64/security/pam_userdb.so db=/opt/vsftpd/etc/virtusers
account sufficient /lib64/security/pam_userdb.so db=/opt/vsftpd/etc/virtusers
session optional pam_keyinit.so force revoke
auth required pam_listfile.so item=user sense=deny file=/opt/vsftpd/etc/vsftpd.user_list onerr=succeed
auth required pam_shells.so
auth include system-auth
account include system-auth
session include system-auth
session required pam_loginuid.so

3.上传vstpd到/etc/init.d

#!/bin/bash
#
# vsftpd This shell script takes care of starting and stopping
# standalone vsftpd.
#
# chkconfig: - 60 50
# description: Vsftpd is a ftp daemon, which is the program \
# that answers incoming ftp service requests.
# processname: vsftpd
# config: /etc/vsftpd/vsftpd.conf
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
RETVAL=0
prog="vsftpd"
start() {
# Start daemons.
site=`basename /opt/vsftpd/etc/vsftpd.conf`
echo -n $"Starting $prog for $site: "
daemon /opt/vsftpd/sbin/vsftpd /opt/vsftpd/etc/vsftpd.conf &
RETVAL=$?
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
echo
return $RETVAL
}
stop() {
# Stop daemons.
echo -n $"Shutting down $prog: "
killproc $prog
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
return $RETVAL
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
stop
start
RETVAL=$?
;;
condrestart)
if [ -f /var/lock/subsys/$prog ]; then
stop
start
RETVAL=$?
fi
;;
status)
status $prog
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|restart|condrestart|status}"
exit 2
esac
exit $RETVAL

vstpd配置文件：/opt/vsftpd/etc/vsftpd.conf

# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local user to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
chown_uploads=NO
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
xferlog_file=/opt/vsftpd/log/vsftp.log
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=nobody
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/opt/vsftpd/etc/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
#local_root=/ynd20_ftp
pam_service_name=vsftpd
userlist_enable=YES
userlist_file=/opt/vsftpd/etc/vsftpd.user_list
tcp_wrappers=YES
chroot_local_user=YES
user_config_dir=/opt/vsftpd/user_conf
guest_enable=YES
guest_username=pso（用户）
virtual_use_local_privs=YES
anon_other_write_enable=NO
cmds_allowed=ABOR,CWD,LIST,MDTM,MKD,NLST,PASS,PASV,PORT,PWD,QUIT,RETR,RMD,RNFR,RNTO,SITE,SIZE,STOR,TYPE,USER,ACCT,APPE,CDUP
,HELP,MODE,NOOP,REIN,STAT,STOU,STRU,SYST

用户添加：/opt/vsftpd/user_conf
新建一个用户名为文件名的文件，比如dsp

local_root=/eInvoice #共享目录
anonymous_enable=NO
write_enable=YES
local_umask=022
anon_upload_enable=NO
anon_mkdir_write_enable=NO
idle_session_timeout=600
data_connection_timeout=120
max_clients=10
max_per_ip=5
local_max_rate=50000 #上传速度 50000=50KB/s
cmds_allowed=ABOR,CWD,LIST,MDTM,MKD,NLST,PASS,PASV,PORT,PWD,QUIT,RETR,RMD,RNFR,RNTO,SITE,SIZE,STOR,TYPE,USER,ACCT,APPE,CDUP
,HELP,MODE,NOOP,REIN,STAT,STOU,STRU,SYST,DELE

用户名，密码文件：
/opt/vsftpd/etc/virtusers
单行账号，双行密码

dsp
dsp@123

查看密码文件命令：strings virtusers.db
生成密码文件数据库： db_load -T -t hash -f virtusers virtusers.db
vstp重启：service vsftpd restart

文章标题：【linux】vstp搭建
分享URL：http://cqcxhl.cn/article/jjcpos.html

重庆分公司，新征程启航

【linux】vstp搭建

其他资讯